Geek Philosophy

All of this Kanban reading I’ve been doing has been great, and as I’ve mentioned before I’ve started implementing some of the techniques and metric tracking. However, after meeting with my manager (himself an experienced Agile thinker), I’ve realized that in some ways I’m trying to solve problems I don’t have, while neglecting some of my bigger issues.

Limited WIP is of course one of the key techniques / philosophies of Kanban (and lean in general). It’s not important in and of itself, but instead because out of it comes increased collaboration, reduced cycle time, identification of bottlenecks, and all of that other great stuff. We haven’t really reaped any benefit from this (yet) besides limiting the backlog, which has fostered cross-business-unit collaboration, but it’s only been 3 weeks or so and we were a fairly disciplined team before that. Some of the metrics I’ve been tracking (such as how long bugs have been in the system before we ship them, and how long items are blocked for) will definitely come in handy to measure the team’s effectiveness and customer responsiveness.

That said, we’ve never really had much of a problem with Work in Progress, at least at the task level. After talking with my manager, we realized that we had another problem, one that was discussed by Johanna Rothman at the recent Agile Vancouver conference – far too many items in our project portfolio! We have 8 people on the team, and had limited our active WIP to 12 (to allow for some blockages), but it turns out that we were working on 7 different, mostly independent projects.  Most of these projects were rather small, and the diffusion of resources was mostly due to the fact that there was no obvious parallelization for most of the projects, but still – that’s almost 1 independent project per person!

Due to the nature of my team (maintaining 3 products, and integrating these products once monthly with software from elsewhere in the company), it’s unlikely that we’ll ever get down to a project WIP limit of one. After we clean up the current mess, we’re going to try 1+1 – a maximum of one project on the go at any given time, with the exception of these small monthly integrations. With the slack time, we can clean up some of our (ample) technical debt. Part of the metrics I’ve been tracking is the percentage of our work spent on “failure load”, a combination of technical debt and missed requirements.

This will likely start in earnest in the new year, but I’m already excited about the results. I’m actually surprised that I let it get this bad – we’d been effectively doing a 1+1 project WIP limit for most of the past year and a half – but I think by formalizing the process a bit more (not making it heavier though!) we can keep ourselves to good habits.

(This post is a continuation. Please read part 1 and part 2 first.)

A year or so had passed since I first started implementing the tracking system I’ve been discussing. However, in August I started work on a larger project that had to go through the company’s formal project tracking system. The project was took about 3 months (we’re just finishing it off), and we have done no releases since – that’s an eternity for a team like mine that’s used to shipping production code very two weeks. With the project coming to a close, I was looking forward to moving back to a process that encouraged more continuous flow.

I had first thought about Kanban after hearing a talk at the Agile Vancouver mini-conference, Lean Development for Lean Times. I’d also recently finished reading David Anderson‘s excellent book Agile Management for Software Engineering, which emphasized the importance of short cycle times and delivering value to the customer quickly. After corresponding with David about this book, I mentioned Kanban to him and was delighted to find that he was working on book on the subject. I was able to obtain a draft of this book to review, and the ideas presented within further cemented my ambition to try Kanban with the team.

Another thing worth noting is that my team had grown, from 5 engineers under me to 8. We’d also taken on maintenance duties for yet another product, bringing the total up to 4. This increase in responsibility caused me to spend more time thinking about our development process, since more was at stake.

Limiting Work In Progress

I’ve mentioned before that the only real difference between what I was doing before and Kanban is the presence of formal Work In Progress (WIP limits). What makes WIP limits so important? As it turns out, this minor change can have major effect on the effectiveness and responsiveness of the team.

Little’s Law, a finding of queuing theory, shows that the cycle time of an item in a system is directly proportional to the number of items in the system. Thus, to reduce cycle time, it is necessary to reduce WIP. This is intuitively obvious – I can finish reading a book faster if I read it all the way through than if I read some, then read the paper, then read another book, then come back to the first book – but by limiting WIP both stakeholders and developers are made explicitly aware of the implications of trying to do too much at once.

The benefits of limiting the size of the backlog have already been discussed in part, but by having a hard cap on the size of the backlog, stakeholders can clearly see that by choosing a certain work item other work items are not being addressed. This leads to increased collaboration between different business units, and forces everyone to “see the whole” (to use lean terminology) – individuals no longer argue for local optimizations (i.e. pushing their agenda through to the detriment of others), but instead come to an agreement about what would be best for the business as a whole.

Limiting the size of the backlog also helps stabilize lead time. Expediting items (“drop what you’re doing and work on this!”) is not conducive to flow, since it almost always involves context switching. Being able to provide stakeholders with the average cycle time of items is of great benefit – it can help make scheduling decisions, decide on relative priorities, and give visibility to other departments.

Limiting WIP in the “active” states (analysis, design, testing, customer acceptance) can help identify and deal with bottlenecks. For instance, if test is a bottleneck, which will be visible when test starts to run up against its WIP limit, we can use techniques from the Five Focusing Steps to alleviate the problem, such as ensuring that test is never idle by having a buffer of work always ready for them. Since the rate of flow through your system is limited by the bottleneck, improving the performance of the bottleneck will directly lead to increased throughput and reduced average cycle time.

I don’t yet have any numbers or metrics for my team showing improvement – I only implemented Kanban a week ago. As soon as I have a large enough set of data draw some conclusions from, I will post my findings.

Any questions so far? I’m understanding all of this, but I haven’t had a chance to explain it to anyone, and I always find that explaining / teaching really helps me solidify my knowledge.

… because this is only 1/6th of the way into my moustache:

From Movember

Remember, it’s easy to donate and help fund prostate cancer research!

(This post is a continuation. Please read part 1 first.)

In my last post I briefly discussed the “kanban-lite” system that I had been using over the past year or so. I adopted this system for several reasons:

• As a team working on multiple projects, there were often multiple stakeholders with different goals who wanted some of my team’s time

Each of these stakeholders had valid reasons for their selections of issues that we should tackle. By getting together and having a weekly meeting to see what was really pressing, I could ensure that I was working towards what was best for the company, not just trying to placate whoever was yelling the loudest. In lean terms, this is known as “seeing the whole”.

• My team was known as the “Fast Track” team, since our primary mandate was to respond rapidly to customer reported defects and small features that could close deals

Project teams at Sophos often undertake projects that are anywhere between 3 and 24 months in length. My releases are more on the order of two weeks. Since I’m releasing software so frequently, I wanted a system that encouraged flow and ensured that we were still delivering high-quality releases. Having a visible board where each item’s state was clearly displayed made it very obvious when we should finish and polish in-progress stories instead of starting new items.

• I’d been reading quite a bit about Lean Software Development, which encourages flow and the elimination of waste (another term for non-value added activities)

A key technique of Lean is value stream mapping – identifying where and when value is added to your product, and pointing out areas that can be removed since they don’t add value. The visual card board is an easy way to show at least part of the value stream (the value stream really begins when a customer files a defect or a product manager thinks of a new feature), and I had thought about (but not gotten around to) recording the amount of time issues spend in the various states.

So, you may ask, why would I switch to Kanban if my system was already working? I’ll discuss that in the next post.

The month of November is known for a lot of things – snowfall, leaves falling, and presidential elections. Around my office, it’s known as Movember – a time when the guys can get together, grow horrible moustaches, and raise a bunch of money and awareness for men’s health issues, particularly prostate cancer.

I have never attempted to become a Mo Bro and grow a moustache – until now! Below is my day 1 photo, clean shaven (well, clean shaven as of last night). Expect it to get much, much worse.

From Movember

So, how can you help with men’s health issues? By donating to my moustache campaign, of course! All of the funds go to Prostate Cancer Canada, and qualify for tax deductions – you can’t afford not to donate! I will be updating photos ever few days throughout the campaign so you can view my horrible, horrible progress.

Thanks in advance!